Employment material briquetting press

mütek MAP 750

Used machine, good condition.
Delivery time appr. 7 weeks after ordering

The basic machine starts at 135.000 € net
*Options at additional cost, see below

Briquetting press e.g. for wood dust, spelled husks, activity material (e.g. for pigs to play and nibble around), animal feed, lucerne or wood shavings. *Optionally, short briquette tablets can be made

Technical specifications:
Throughput capacity up to a maximum of 750 kg/h (depending on the material)
(e.g. sawdust with a bulk density of 250 kg/qbm)
An exact statement about the throughput is only possible after a test with your material. Can vary greatly depending on the bulk density of the starting material.

Goods tariff number: 84793010
Briquette Ø 65 mm
including 2 m press channel
Engine power main engine 37 kw
Feed screw geared motor 2.2 kw
Compressor screw 5.5 kw
Hydraulic pump motor 0.37 kw
Total connection value: approx. 47 kW
Control panel with plain text display for operating states
and utilization indicator for the main drive and feed screws
PLC control with operating hours counter in the control cabinet
Machine has CE mark
Automatic start-stop function
Dimensions 3100x860x1800 mm lxwxh
Weight 3800kg

Optional Equipment – Additional Charges

Temperature Control Unit for the Pressing Tools
For maintaining the required temperature to ensure optimum briquette quality. Temperature control for pump, cooling unit, fan and pressure switch.
Ready-wired for connection – mandatory for operation.
Including corresponding control system: €3,990 net

Cut-to-Length Device
For cutting the briquettes to the required length: €5,750 net
Compressed air connection required.

Silo for MAP Series
€19,970 net

Storage silo installed above the machine
Bwjdpfx Ajfmqq Ejavsw
Capacity: approx. 6 m³
Robust steel construction with agitator discharge system and level sensor

Conveyor Line / Cooling Section
(Nominal length: 5 × 2 m)
€750 net per 2 metres

Assembly / commissioning (nominal value approx. 2-3 days on site)
according to expenditure on proof against separate calculation. The following sentences apply:
Service technician/mechatronics technician per hour of assembly and travel: €129.00
Overtime: 25% surcharge
50% surcharge for each Saturday and night hour
100% surcharge for each Sunday and holiday hour
Release per mechanic per day: depends on the country
Per car and van and driven kilometer: 0.98 € / km
Arrival and accommodation against receipt or flat rate billing at the expense of the client.
.
Test with the respective customer material: (by arrangement, up to a maximum of 750 kg) - 1,970 € net
.
Raw material requirements:
- The moisture content (atro) must be between at least 6 and a maximum of 15%
- Maximum chip length 18 mm
- Installation temperature: room with a temperature of at least +5°C
- The charge must be free of metals and mineral impurities. This can result in damage to the pressing tools and/or increased wear